SISTEMA DE ENFRIAMIENTO DE PRECISION TRIPP LITE SRCOOLDXRW25 SISTEMA DE ENFRIAMIENTO DE PRECISIóN E [ SRCOOLDXRW25 ][ AA-142 ]

SISTEMA DE ENFRIAMIENTO DE PRECISION TRIPP LITE SRCOOLDXRW25 SISTEMA DE ENFRIAMIENTO DE PRECISIóN E [ SRCOOLDXRW25 ][ AA-142 ]

Tripp Lite
SRCOOLDXRW25
Nuevo

Tripp Lite In-Row Precision Cooling System - 25.8 kW (88,000 BTU), 3PH, 208V, 42U, 300mm, Black, Grey, Aluminium, Steel, 25800 W, LED, 42U, 6 fan(s)

block Fuera de stock
Fuera de stock
$632,877.07
IVA incluido
Cantidad

Producto sobre pedido, por favor contáctanos por correo o teléfono
In-row precision air conditioner provides robust cooling in a space-saving footprint for small to medium data centers and high-performance computer room.

Slim Air Conditioning System Saves Space While Delivering Primary Precision Cooling
This SmartRack® in-row precision air conditioning system is the ideal cooling option for your small-to-medium data center, IT room or other edge location. Typical CRAC/CRHC units are too large for these locations, but the SRCOOLDXRW25 cools your mission-critical equipment while occupying very little floor space, supporting up to 25.8kW (88,000 BTU/hr) of heat load per unit. The cabinet is just 300 millimeters wide, making it easy to position optimally within a row for precision close-coupled cooling. It requires the same front and rear clearance as a standard rack enclosure.

Uses DX Technology to Deliver Cool Air to Loads
This direct expansion (DX) cooling system pulls unconditioned air through the rear of the unit, cools it with condensed refrigerant and delivers it to equipment loads with up to 88,000 BTU/hr and nearly 2,950 CFM airflow. EC fans and a variable speed compressor provide variable airflow and constant temperature based on room conditions.

High Cooling Efficiency Saves You Money
Inverter compressor and EC fan technology automatically regulate cooling output to match heat load and conserve energy during off-peak hours, lowering your overall energy costs and lengthening the lifespan of the equipment being cooled. The close-coupled design captures heat at the source to improve energy efficiency by 25% over traditional perimeter CRACs. In addition, the SRCOOLDXRW25 is ideally sized for your small-to-medium data center at virtually any density, saving you the cost of a raised floor or an overbuilt/overprovisioned CRAC unit. It uses eco-friendly R410A refrigerant, reflecting your commitment to environmental responsibility.

Easy to Operate with the Color Touchscreen
You have total control over the SRCOOLDXRW25 using the front-panel color touchscreen interface, which lets you monitor and access system configuration and status information. A built-in controller detects and manages data center temperatures, automatically adjusts cooling levels and supports various control modes. Intelligent temperature control and variable speed technology allow precise airflow and temperature adjustment to match specific load requirements closely without wasting energy on overcooling.

Reconfigure Your Cooling Needs as Your Equipment Needs Change
The modular, in-row cabinet design easily facilitates expansion or movement on its built-in casters, allowing your increasing cooling needs to be reconfigured as your data center grows. A simple redundancy model (N+1) is built in as part of the number of scalable units to be deployed.

Pre-Installed WEBCARDLXMINI Network Interface Offers 24/7 Access
Remote access to the SRCOOLDXRW25 can save you the time and expense of having someone constantly on-site. The built-in WEBCARDLXMINI lets you manage temperatures, receive alerts, review logs and control settings 24/7 via HTTP(S), menu/CLI via SSH/Telnet and SNMP for integration with management software platforms such as DCIM. The ability to configure settings and monitor alarms off-site can bolster your bottom line.

Designed for Simple Maintenance and Convenience
By placing the SRCOOLDXRW25 close to a rack, you can eliminate hot spots. A water pump automatically drains condensed water and detects the fill pan’s level to avoid leakage. Insulated side panels isolate the unit from external temperature variations. Electrical connections can be routed through either the top or bottom, whichever is more convenient for your application. The SRCOOLDXRW25 supports front or side air discharge. You can configure included panels to direct airflow as necessary to adapt to nearly any environment.

Tripp Lite In-Row Precision Cooling System - 25.8 kW (88,000 BTU), 3PH, 208V, 42U, 300mm. Housing colour: Black, Grey, Housing material: Aluminium, Steel, Cooling capacity in watts (max): 25800 W. Input power: 10000 W, Input voltage: 208 V, Input frequency: 60 Hz. Width: 299.7 mm, Depth: 1099.8 mm, Height: 2001.5 mm. Package width: 599.4 mm, Package depth: 1198.9 mm, Package height: 2279.9 mm. Country of origin: China, Products per master (outer) case: 1 pc(s)
Housing colourBlack, Grey
Housing materialAluminium, Steel
Cooling capacity in watts (max)25800 W
Built-in displayYes
Display typeLED
Rack capacity42U
Number of fans6 fan(s)
Fan speed controlYes
Noise level80 dB
Maximum airflow2950 cfm
Input power10000 W
Input voltage208 V
Input frequency60 Hz
Sustainability complianceYes
Sustainability certificatesFederal Communications Commission (FCC), RoHS
Width299.7 mm
Depth1099.8 mm
Height2001.5 mm
Weight198.2 kg
Package width599.4 mm
Package depth1198.9 mm
Package height2279.9 mm
Package weight387.8 kg
ManualYes
Country of originChina
Products per master (outer) case1 pc(s)
Harmonized System (HS) code8415.90.8085
: SRCOOLDXRW25
Fuera de stock
Nuevo

7 otros productos en la misma categoría: